NetBSD 3.0_STABLE (MIYU) #0: Thu Apr 13 19:16:59 MEST 2006 feyrer@miyu:/home/cvs/src-3/sys/arch/i386/compile/obj.i386/MIYU total memory = 511 MB avail memory = 496 MB BIOS32 rev. 0 found at 0xfb0a0 PCI BIOS rev. 2.1 found at 0xfb0d0 pcibios: config mechanism [1][x], special cycles [1][x], last bus 1 PCI IRQ Routing Table rev. 1.0 found at 0xfdb00, size 128 bytes (6 entries) PCI Interrupt Router at 000:07:0 (VIA Technologies VT82C596A PCI-ISA Bridge compatible) PCI Exclusive IRQs: 5 10 11 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium III (686-class), 799.76 MHz, id 0x683 cpu0: features 387f9ff cpu0: features 387f9ff cpu0: features 387f9ff cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way cpu0: L2 cache 256 KB 32B/line 8-way cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way cpu0: serial number 0000-0683-0001-60A1-5974-BE68 cpu0: 8 page colors pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0x44) agp0 at pchb0: aperture at 0xe0000000, size 0x10000000 ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CPU-AGP Bridge (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies Rage Fury MAXX AGP 4x (TMDS) (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 pcib0 at pci0 dev 7 function 0 pcib0: VIA Technologies VT82C596A PCI-ISA Bridge (rev. 0x23) viaide0 at pci0 dev 7 function 1 viaide0: VIA Technologies VT82C596A (Apollo Pro) ATA66 controller viaide0: bus-master DMA support present viaide0: primary channel configured to compatibility mode viaide0: primary channel interrupting at irq 14 atabus0 at viaide0 channel 0 viaide0: secondary channel configured to compatibility mode viaide0: secondary channel interrupting at irq 15 atabus1 at viaide0 channel 1 uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x11) uhci0: interrupting at irq 5 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pchb1 at pci0 dev 7 function 3 pchb1: VIA Technologies product 0x3050 (rev. 0x30) ne0 at pci0 dev 14 function 0: Realtek 8029 Ethernet ne0: Ethernet address 00:50:ba:aa:a7:7f ne0: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto ne0: interrupting at irq 11 siop0 at pci0 dev 16 function 0: Symbios Logic 53c810 (fast scsi) siop0: interrupting at irq 10 scsibus0 at siop0: 8 targets, 8 luns per target rtk0 at pci0 dev 18 function 0: Realtek 8139 10/100BaseTX rtk0: interrupting at irq 5 rtk0: Ethernet address 00:a0:d2:a5:e9:f5 ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto eap0 at pci0 dev 20 function 0: Ensoniq AudioPCI 97 ES1373-8(rev. 0x08) eap0: interrupting at irq 5 eap0: ac97: Winbond W83971D codec; KS Waves 3D eap0: ac97: ext id c000 audio0 at eap0: full duplex, mmap, independent midi0 at eap0: AudioPCI MIDI UART isa0 at pcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd: error setting scanset 2 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi1 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.2 (slowidle) fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec scsibus0: waiting 2 seconds for devices to settle... atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2 wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) cd0(viaide0:0:1): using PIO mode 4, DMA mode 2 (using DMA) wd1 at atabus1 drive 0: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 233 GB, 486344 cyl, 16 head, 63 sec, 512 bytes/sect x 490234752 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd2 at atabus1 drive 1: wd2: drive supports 16-sector PIO transfers, LBA addressing wd2: 29314 MB, 59560 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors wd2: 32-bit data port wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) wd2(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) siop0: alloc newcdb at PHY addr 0x188a000 cd1 at scsibus0 target 6 lun 0: cdrom removable cd1: async, 8-bit transfers boot device: wd0 root on wd0a dumps on wd0b init: copying out path `/sbin/init' 11 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)